Beranda / Arduino Nano CH340/FT232 (KW) IC - Mini USB Belum Disolder

Arduino Nano CH340/FT232 (KW) IC - Mini USB Belum Disolder

Referensi T13C-L2D22

Pakai Atmega328P (Old Bootloader)

Close serial jika upload gagal

Stok 193

Rp. 47.000

Arduino Nano CH340/PL2303 IC - Belum Disolder

PENTING!! : Untuk arduino nano ch340 tidak di sertakan dengan kabel data. Kabel data di jual terpisah
Specs:
Microcontroller: ATmega328PB
Operating Voltage (logic level): 5V
Input Voltage (recommended): 7-12V
Input Voltage (limits): 6-20V
Digital I/O Pins: 14 (of which 6 provide PWM output)
Analog Input Pins: 8
DC Current per I/O Pin: 40mA
Flash Memory: 32KB (ATmega328) of which 2 KB used by bootloader
SRAM: 2KB (ATmega328)
EEPROM: 1KB (ATmega328)
Clock Speed: 16 MHz
Dimensions: 43 x 18 x 19mm
Weight: 6g
 
Installing Driver

 here for the driver software  : http://www.wch.cn/downloads.php?name=pro&proid=65

Before connecting the Nano to your USB port:

  1. Download the “ch341ser,exe” file and run it.The software extracts about 8 files.
  2. The software asks whether it can install the CH341SER.INF driver for the CH340 chip (Version 11/04/2011, 3.3.2011.11). Click INSTALL
  3. A Windows message asks whether the driver has installed correctly. Click YES.
  4. Connect your Nano.
  5. From Control Panel, open Device Manager and Ports. If installed correctly you should see an entry “USB-SERIAL CH340 (COMXX)
 
*Note: This is not an original Arduino brand product, it is manufactured with the same components and functionality by a different manufacturer.

Produk Terkait