XBee S2C Wire Antenna (XB24CZ7WIT-004)

T124

Baru

7 item

Rp. 400.000


JumlahHargaAnda menghemat
5 Rp. 395.000 Sampai dengan Rp. 25.000
10 Rp. 390.000 Sampai dengan Rp. 100.000

XBee S2C Wire Antenna (XB24CZ7WIT-004)

XBee ZB / ZigBee modules provide cost-effective wireless connectivity to devices in ZigBee mesh networks. Utilizing the ZigBee PRO Feature Set, these modules are interoperable with other ZigBee devices, including devices from other vendors. The most common factor in determining whether to use ZB is the potential need to tie-in with other ZigBee-compatible networks or mesh networking. If this is not a requirement, the series 1 802.15.4 modules may be perfectly suitable for your project.

Features:

  • Low-power module uses only ~33 mA to transmit
  • Indoor range of 200 feet, or outdoors up to 4000 feet line-of-sight
  • Supports binding and multicasting for home automation
  • 15 general-purpose I/O lines
  • Industry-leading sleep current of sub 1µA

Specifications

  • Digital I/O: 15
  • ADC Channels: (4) 10-bit ADC inputs
  • Data Rate: RF 250 Kbps, Serial up to 1 Mbps
  • Range: Indoor 200 ft (60 m), Outdoor (LOS) 4000 ft (1200 m)
  • Transmit Power: 3.1 mW (+5 dBm)
  • Channels: 16 channels
  • Encryption: 128-bit AES
  • Voltage requirements: 2.1 to 3.6 VDC
  • Current requirements: ~33 mA @ 3.3VDC (transmit), ~28 mA @ 3.3VDC (receive), <1 uA @25ºC (sleep)
  • Communication: CMOS UART / SPI @ ~3.3V
  • Dimensions: 1.087" L x 0.960" W x 0.16" H (27.61 x 24.38 x 4.06 mm)
  • Operating temperature range: -40 to +185 °F (-40 to +85 °C)

TUTORIALS / REFERENCE / DOCUMENTS
 
Zigbee communication with 2 Arduino (by recolog.blogspot)
Arduino UNO - XBee Setup (by arduinobasics.blogspot)
Arduino and Xbee setup (arduino.cc)
 

Related Products