PN532 NFC Module for Raspberry Pi

Baru

3 item

Pemberitahuan: Barang terakhir di stok!

Rp. 275.000


JumlahHargaAnda menghemat
5 Rp. 270.000 Sampai dengan Rp. 25.000

PN532 NFC Module for Raspberry Pi
.
Introduction

The ITEAD PN532 NFC module, as its name suggests, is based on the PN532 chip for near field communication at 13.56 MHz. The module is equipped with an onboard antenna so there is no external antenna coil. It is compatible with SPI, IIC, and UART interfaces for communication. With the NFC library supporting Arduino and the Raspberry Pi we offer, the development of NFC-enabled products is very convenient.

.

Characteristics

  • The longest effective communication distance is 5 cm 
  • Support SPI, IIC, UART interface switching. 
  • Can be used for 13.56M contactless communication 
  • Compatible with ISO14443 TYPE A and Class B standards

.

specification

chip NXP PN532
Operating Voltage3.3V 
voltage 3.3 to 5.5V 
Maximum supply current 150 mAh
Working current (standby mode)100 mAh 
Working current (write mode) 120 mAh
Working current (read mode)120 mAh 
pointer PWR
interface Raspberry Pi's 20pins interface standard SPI interface,

There are two slide switches on the board to select the interface mode: 

 SET0SET1 
UARTLL
SPI LH
IIC HL

Related Products