Arduino Nano CH340/PL2303 IC

T129B411

Baru

2 item

Pemberitahuan: Barang terakhir di stok!

Rp. 80.000

Rp. 60.000

-Rp. 20.000


JumlahHargaAnda menghemat
10 Rp. 58.000 Sampai dengan Rp. 20.000
PENTING!! : Untuk arduino nano ch340 tidak di sertakan dengan kabel data. Kabel data di jual terpisah
Specs:
Microcontroller: ATmega328
Operating Voltage (logic level): 5V
Input Voltage (recommended): 7-12V
Input Voltage (limits): 6-20V
Digital I/O Pins: 14 (of which 6 provide PWM output)
Analog Input Pins: 8
DC Current per I/O Pin: 40mA
Flash Memory: 32KB (ATmega328) of which 2 KB used by bootloader
SRAM: 2KB (ATmega328)
EEPROM: 1KB (ATmega328)
Clock Speed: 16 MHz
Dimensions: 43 x 18 x 19mm
Weight: 6g
 
Installing Driver

 here for the driver software  : http://www.wch.cn/downloads.php?name=pro&proid=65

Before connecting the Nano to your USB port:

  1. Download the “ch341ser,exe” file and run it.The software extracts about 8 files.
  2. The software asks whether it can install the CH341SER.INF driver for the CH340 chip (Version 11/04/2011, 3.3.2011.11). Click INSTALL
  3. A Windows message asks whether the driver has installed correctly. Click YES.
  4. Connect your Nano.
  5. From Control Panel, open Device Manager and Ports. If installed correctly you should see an entry “USB-SERIAL CH340 (COMXX)
 
*Note: This is not an original Arduino brand product, it is manufactured with the same components and functionality by a different manufacturer.

Related Products