DIY Powerbank Aluminium Alloy Case 3x 18650 Casing Power Bank

E431B3A

Baru

Stok Habis

Rp. 35.000


JumlahHargaAnda menghemat
10 Rp. 34.000 Sampai dengan Rp. 10.000

DIY Powerbank Aluminium Alloy Case 3x 18650 Casing Power Bank

Color: SILVER

Output parameters : 5V/0.1-1A (high-current devices, fast-charging mobile phones, mobile phones with more than 5 inches screen, slow charging, or unsupported)

Input interface: V8 port, micro USB (Android port, flat port)

Output parameters : single USB output: standard current 1A

Power display : 4-level LED lights display power, intelligent automatic shutdown in non-working state

Read before buying:

1: Battery that can be used: 18650 lithium battery (without protection board)

Requirements for battery access: 3.3-4.2V lithium battery (18650 lithium battery): no other batteries, such as 1.2V 18650 Ni-MH battery, 3.2V lithium iron battery, all dry batteries, 12V lead-acid battery

2: Charge and discharge protection: built-in lithium battery protection IC on the circuit board, with overvoltage protection, overcurrent protection, undervoltage protection, etc.

3: 4 batteries can be installed at most 3 18650 batteries (3 batteries, 2 batteries, 1 battery is not a problem).

4: Charging input requirements: the best match is the charger above 5V1A, any other 5V constant voltage power supply can be used as the charging input power supply

5: Just after the battery is connected, the circuit board is usually charged and activated before the output will be output. If the mobile power supply is not used for a long time, the power supply will turn off the output, and it still needs to be activated.

*KABEL CHARGER /BATERAI DAN CHARGER TIDAK TERMASUK (HANYA BOX DAN MODULE POWER BANK SAJA)
*HANYA SUPPORT UNTUK BATERAI 18650 FLAT TOP

Related Products