DIY Powerbank Aluminium Alloy Case 1x 18650 Casing Power Bank

E431-L3C22

Baru

80 item

Rp. 15.000


JumlahHargaAnda menghemat
10 Rp. 14.500 Sampai dengan Rp. 5.000

DIY Powerbank Aluminium Alloy 1x 18650 Power Bank

READY WARNA :

- PINK FUSCHA
- MERAH
- SILVER ROSE
- SILVER
- HITAM
- HIJAU
- BIRU TUA
- UNGU

WARNA DIKIRIM RANDOM!

Input: 5V/1A (MAX)

Output: 5V/0.1-1A ( (only supports low current devices above 0.1A, less than 1A, if the charge is disconnected, the charge is intermittent, or can not be charged in a few minutes, there are only two reasons, one is the mobile phone current is too large , a battery internal resistance is caused by excessive, for no other reason.) .

Tips: Please install the battery positive and negative poles, the battery negative pole is connected to the spring, the battery positive pole is connected to the metal shrapnel, and the counter will burn the motherboard.
Charging display: When the battery is charged, the flashing light will be on. When it is full, the indicator light will be on. If it is more than 8 hours, it will flash. If there is no battery, there is no output, the battery is damaged or the battery is not suitable. There is output, the battery internal resistance is too large, at this time in general, charging for 4 hours is enough.

*KABEL CHARGER /BATERAI DAN CHARGER TIDAK TERMASUK (HANYA BOX DAN MODULE POWER BANK SAJA)
*HANYA SUPPORT UNTUK BATERAI 18650 FLAT TOP

Related Products