DIY Powerbank LCD Case Modul Enclosure Casing Power Bank 5x 18650 2.1A -Putih

E431B3A

Baru

19 item

Rp. 60.000


JumlahHargaAnda menghemat
10 Rp. 58.000 Sampai dengan Rp. 20.000

DIY Powerbank LCD Case Modul Enclosure Casing Power Bank 5x 18650 2.1A -Putih

Brand : Neutral

Power display : LCD liquid crystal display shows the power.

Color: blue, white, purple, green 

LED lighting : Yes

Output: 5V/0.1-2.3A (1xUSB 2.1A, 1xUSB 1A)

Input: 5V/0.1-2A

Must read before purchase:

1: Usable battery: 18650 lithium battery (no protection board) or polymer battery

Access battery requirements: 3.3-4.2V lithium battery (18650 lithium battery or polymer lithium battery): can not be connected to other batteries, such as 1.2V 18650 nickel-hydrogen battery, 3.2V iron lithium battery, all dry batteries, 12V lead Acid battery

2: Charge and discharge protection: lithium battery protection IC built in the circuit board, with overvoltage protection, overcurrent protection, undervoltage protection, etc.

3:5 can be loaded with up to 5 18650 batteries (3, 2, 1).

4: Charging input requirements: The best match is the charger of 5V1A or above, and any other 5V constant voltage power supply can be used as the charging input power supply.

5: Bring your own flashlight instructions: Double-click the key to activate the flashlight function, and then double-click to close. 

6: When the mobile power supply enters the working state from standby, the blue backlight is illuminated and goes out after 15S; press the tact switch ON/OFF once, the blue backlight is lit again for 15S, which is convenient for viewing the LCD display. 

Note: After the first power-on, there is no output, you need to activate it with the 5V voltage input on the charging port.

*KABEL CHARGER /BATERAI DAN CHARGER TIDAK TERMASUK (HANYA BOX DAN MODULE POWER BANK SAJA)
*HANYA SUPPORT UNTUK BATERAI 18650 FLAT TOP

Related Products